Waterfall Setting Tool – WHVC1

Precise Alignment for Waterfall Countertops

The Aardwolf Waterfall Setting Tool WHVC1 is designed to position and align mitered waterfall panels during countertop installation. Its adjustable frame helps installers bring the vertical panel into accurate alignment with the countertop while the adhesive cures.

Four vacuum cups—two on each tool—securely grip smooth, nonporous surfaces such as granite, marble, quartz, and engineered stone. Integrated vacuum indicators allow the operator to monitor suction throughout the installation.

Supplied as a matched set of two tools: one left-hand unit and one right-hand unit.

Key Features

• Accurately aligns mitered waterfall joints
• Independent horizontal and vertical adjustment
• Four Ø200 mm vacuum cups
• Built-in vacuum indicators for visual monitoring
• Hand-operated vacuum pumps
• Quick-release valves for easy removal
• Tool-free adjustment knobs
• Aluminum and stainless-steel construction
• Compact design for shop or jobsite use
• Suitable for smooth, nonporous stone surfaces

How It Works

1. Position one WHVC1 tool near each end of the waterfall joint.
2. Secure the vacuum cups to the countertop and vertical panel.
3. Use the adjustment knobs to bring the two surfaces into alignment.
4. Fine-tune the mitered joint before the adhesive cures.
5. Release the vacuum cups and remove the tools after the joint is secure.

Specifications

*Capacity depends on the material’s surface condition, cleanliness, porosity, and proper vacuum engagement. The WHVC1 is an alignment and positioning tool; it should not be presented as an overhead lifting device unless it has specifically been tested and rated for that purpose.